11-18 features all specifcations are subject to change without notice. epc-6200 programmable embedded controller with intel? atom? n270 platform ? etx cpu module for scalable and time-effcient customization ? 512kb sram built-in for critical data backup ? rich i/o on the panels with 2 pc/104-plus expansion slots ? support wide range dc power input (12 ~ 30v) ? support din rail & wall mounting ? rugged design for shock/vibration protection ? easy installation/maintenance ? fanless design system cpu soldered onboard intel? atom? n270 1.6ghz cpu with 533mhz fsb memory 1 x 200-pin ddr2 so-dimm socket supports 400/533mhz sdram up to 2gb 1 x 512kb sram built-in for emergent data backup chipset intel? 945gse + ich7m graphics integrated intel? gma950 gfx core in 945gse gmch ata 2 x serial ata ports at 150mb/s hdd transfer rate lan chipset 1 x realtek rtl8103el 10/100base-t ethernet controller 1 x realtek 8110scl gigabit ethernet controller watchdog timer 1~255 levels reset i/o serial port 1 x db-44 female connector: support 2 x rs-232 ports ; 2 x rs-232/422/485 selectable ports usb port 4 x usb 2.0 ports lan 2 x rj-45 ports support - 1 x 10/100base-t ethernet - 1 x gigabit ethernet video port 1 x db-15 female connector for analog rgb digital i/o 1 x 16-bit programmable digital input/output audio mic-in/line-out expansion bus 2 x pc/104-plus slots environmental operating temp. -20 ~ 70c (- 4 ~ 158f), ambient w/ air flow storage temp. -40 ~ 80c (-40 ~ 176f) relative humidity 10 ~ 95% @ 40c (non-condensing) vibration 3 grms/5~500hz/random operation shock & crash operating 20g (11ms), non-operating 60g with hdd operating 40g (11ms), non-operating 80g with cf/ssd crash 100g (11ms) qualifcation certifcation ce, fcc power requirement power input dc 12 ~ 30v input (w/ 1 x 3-pin dc input terminal block) power consumption 21w (19v@1.1a) storage type 1 x 2.5" drive bay for hdd/ssd 1 x compactflash type ii socket which is outside accessible mechanical construction heavy-duty steel housing + aluminum heatsink mounting wall-mount/din rail mounting weight 1.7 kg (3.74 lb) (bare-bone) dimensions (w x d x h) 130 x 195 x 85 mm (5.12" x 7.68" x 3.35") drawing ordering information epc-6200 barebone system with 1gb dram wmk-6x00 wall mount kit for epc - 6x00 PAC-P120W 120w ac/dc adapter kit ssd-25080 intel? 2.5" 80gb sataii ssd kit cbl-6x00-com com converter cable (1 x 44-pin male connector to 4 x db-9 female + 1 x db-9 female) l = 200 mm 130.00 85.00 195.00 5p 5p 5p unit: mm
|
